Check the vortex chamber to see if the door is closed tightly before driving to prevent sand and stone from rushing out of the vortex chamber observation door and causing danger.
E-VSI Series Vertical Shaft Impact Crusher – SANME
Product Dispaly
FEATURES AND BENEFITS OF VC7 SERIES VERTICAL SHAFT IMPACT CRUSHER
Check the rotation direction of the impeller, from the direction of the inlet, the impeller should be rotated counterclockwise, otherwise the motor wiring should be adjusted.
The starting sequence of sand making machine and conveying equipment is: discharge → sand making machine → feed.
The sand making machine must be started without load and can be fed after normal operation. The stop order is the opposite of the start order.
The feeding particles in strict accordance with the requirements of the provisions, prohibit more than the specified material into the sand making machine, otherwise, it will cause the impeller imbalance and excessive wear of the impeller, the base to cause blockage of the impeller channel and the central feeding pipe, so that the sand making machine can not work normally, found that the bulk of the material should be eliminated in time.
The lubrication of the machine: use the required special grade of automotive grease, add the amount of 1/2-2/3 of the bearing cavity, and add the appropriate amount of grease for each working shift of the sand making machine.
Product Data
Technical Data of VC7(H) Series Vertical Shaft Impact Crusher:
| Model | Feeding Size(mm) | Speed of Rotor(r/min) | Throughput(t/h) | Motor Power(kw) | Diameter of Impeller（mm） |
| E-VSI-110 | ≤30 | 1485 | 30-60 | 110 | 900 |
| E-VSI-160 | ≤30 | 1485 | 40-80 | 160 | 900 |
| E-VSI-200 | ≤40 | 1485 | 60-110 | 200 | 900 |
| E-VSI-250 | ≤40 | 1485 | 80-150 | 250 | 900 |
| E-VSI-280 | ≤50 | 1215 | 120-260 | 280 | 1100 |
| E-VSI-315 | ≤50 | 1215 | 150-300 | 315 | 1100 |
| E-VSI-355 | ≤60 | 1215 | 180-350 | 355 | 1100 |
| E-VSI-400 | ≤60 | 1215 | 220-400 | 400 | 1100 |
The crusher capacities listed are based on instantaneous sampling of medium hardness material. The above data are for reference only, please contact our engineers for equipment selection of specific projects.
The chamber configuration of VC7 Series Vertical Shaft Impact Crusher
Single motor driving, lower power consumption.
Simple structure, convenient installation & maintenance, lower operation cost.
Premium product shape-cubical,low percentage of flake shape product.
WORKING PRINCIPLE OF VC7 SERIES ROTOR CENTRIFUGAL CRUSHER
The materials fall into impeller with high-speed rotation vertically. On the force of high-speed centrifugal, the materials strike to the other part of material in a high speed. After mutual impacting, the materials will strike and rub between the impeller and the casing and then be discharged straight from the lower portion to form a closed multiple cycles. Final product is controlled by screening equipment to meet the requirement.
Write your message here and send it to us
