Belt Conveyor – SANME

Belt conveyor has advantages of large delivery value, long delivery distance, smooth and steady performance, no relative motion between belt and materials, with the merits of simple structure, easy maintenance.

CAPACITY : 40-1280t/h
MAX FEEDING SIZE: /
RAW MATERIALS : Granite, limestone, concrete, lime, plaster, slaked lime, etc.
APPLICATION : Mining, metallurgical, chemical industries, foundry and building materials, etc.

CONTACT NOW

Introduction

Display

Features

Data

Product Tags

Product Dispaly

FEATURES AND TECHNOLOGY ADVANTAGES OF BELT CONVEYOR

Barrel-type eccentric shaft vibration exciter and partial block to adjust the amplitude, easy operation and maintenance.

Woven screen mesh by spring steel or punching sieve, with long service time and not easy blockage.

Use rubber vibration isolation spring, with long service time, low noise and stable resonance zone.

Product Data

Technical Data of Belt Conveyor

Belt width (mm)	Length (m)/Power (kw)			Selivery speed (m/s))	Capacity (t/h)
400	≤12/1.5	12-20/2.2-4	20-25/4-7.5	1.3-1.6	40-80
500	≤12/3	12-20/4-5.5	20-30/5.5-7.5	1.3-1.6	60-150
650	≤12/4	12-20/5.5	20-30/7.5-11	1.3-1.6	130-320
800	≤6/4	6-15/5.5	15-30/7.5-15	1.3-1.6	280-540
1000	≤10/5.5	10-20/7.5-11	20-40/11-22	1.3-2.0	430-850
1200	≤10/7.5	10-20/11	20-40/15-30	1.3-2.0	655-1280

The equipment capacities listed are based on instantaneous sampling of medium hardness materials.The above data is for reference only,please contact our engineers for equipment selection for specific projects.

APPLICATION OF BELT CONVEYOR

Belt Conveyor is widely used in the field of mining, metallurgical, chemical industries, foundry and building materials, and applied in the work site of hydroelectric project and harbor as a delivery line for bulk materials as well as lump product. It is the essential equipment for sand stone product line.

WORKING PRINCIPLE OF BELT CONVEYOR

First of all, using weighing frame to detect the weights of materials on the belts, and digital speed measurement sensor to measure the running speed of feeder, of which the pulse output is proportional to the speed of feeders; and both signals be sent to feeder controller to process the information by the microprocessor and then show the total amount or the instant flow. This value will be compared with the setting ones, and the controller send the signal to control the speed of belt conveyor to satisfy the requirements of constant feeding.